Globe Broadband Speed-Up Connection

Be sure to follow the steps correctly as we shall not be held liable
in case you mess your connection. This is for Windows XP only.
Please ensure that you make a restore point before you proceed
as this is an indirect registry modification.

Shall we start?

Download TCP Optimizer "http://download.cnet.com/SG-TCP-Optimizer/3000-2155_4-10415840.html
*- a free program for optimizing
dial-up, DSL and cable internet connections.
* Run TCP Optimizer (FYI: the executable file is standalone so
there's no installation needed).
* In the General Settings tab, do the following:

o [Check] Custom settings
o [Check] Modify All Network Adapters
o Your network adapter will be automatically selected, if
not type your adapter manually.
o MTU: 1452 (Read complete definition of MTU)
o TTL: 64 (Read complete definition of TTL)
o TCP Receive Window: 937500
o MTU Discovery: Yes
o Black Hole Detect: No
o Selective Acks: Yes
o Max Duplicate ACKs: 3

* In the TCP 1323 Options, uncheck both Windows Scaling and
Timestamps.
* In the Advanced Settings tab, put the following:

o Max Connections per Server: 16
o Max Connections per 1.0 Server: 16
o LocalPriority: 1
o Host Priority: 1
o DNSPriority: 1
o NetbtPriority: 1
o Lan Browsing speedup: optimized
o QoS: NonBestEffortLimit: 0
o ToS: DisableUserTOSSetting: 0
o ToS: DefaultTOSValue: 80
o MaxNegativeCacheTtl: 0
o NetFailureCacheTime: 0
o NegativeSOACache Time: 0
o LAN Request Buffer Size: 128000

* Setting the slider anywhere between 1500 to 3000 kbps
range is your discretion until you get satisfactory speed.
* Click 'Apply Changes' and reboot your computer for the
changes to take effect.

if it didnt work add this items.

Tweak the Network Redirector Buffers

By increasing the number of these buffers, you may get a higher
transfer rate for the data that travels though the network. Open
the Registry Editor navigate to this location:

HKEY_LOCAL_MACHINE > System > CurrentControlSet > Services
> LanmanWorkstation > Parameters

Using the procedure explained in the previous tweak, add two
new DWORD values:

MaxCmds and MaxThreads

Give both the same value between 0 and 255. It is recommended
to choose the value of 64.

Mozilla FIREFOX tweaked 30xfaster

Here is:

1. Type “about:config” into the address bar and hit return. Scroll down and look for the following entries:

network.http.pipelining
network.http.proxy.pipelining
network.http.pipelining.maxrequests

Normally the browser will make one request to a web page at a time. When you enable pipelining it will make several at once, which really speeds up page loading.

2. Alter the entries as follows:

Set “network.http.pipelining” to “true”
Set “network.http.proxy.pipelining” to “true”
Set “network.http.pipelining.maxrequests” to some number like 30. This
means it will make 30 requests at once.

3. Lastly right-click anywhere and select New-> Integer.

Name it “nglayout.initialpaint.delay” and set its value to “0?.
This value is the amount of time the browser waits before it acts on information it recieves.

Cproxy can't connect Solution

so here it goes

1. CHANGE MUNA YOUR SIGNAL TO GPRS (para mas mataas ang signal bars or dapat 90% , kasi ayaw nya ng hsdpa kung mahina ang signal just like mine

2. if you're connected na sa cproxy (kahit 0 balance)
go to cproxy apps

then update your cproxy

click about application

click check for update now

wait for the update be finished

restart cproxy

now disconnect connection

change your signal to hsdpa..

ok na kahit mahina signal basta meron

then connect